Many thanks to an end user for locating copies of these USBScope Registers and USBScope, Wave, Pulse, Count Communications Protocol Documents
USBScope Registers by Synchrotech
USBScope, Wave, Pulse, Count Communications Protocol by Synchrotech
We're currently phasing in Link Instruments' devices to replace the now EOL Elan ones, but there are still a lot of end users with the EOL items. To see all of the Elan and Link Instruments' we carry, see our test equipment page.
The MSO-19 can trigger on the Oscilloscope, Logic Analyzer, SPI or I2C inputs. Since all of the 9 inputs sample at the same time you will see a fully synchronized display of all the digital and analog inputs. Oscilloscope trigger: Rising edge, falling edge and pulse width. Logic Analyzer trigger: 8 bit trigger word, SPI trigger: 32 bit trigger word, I2c trigger: 32 bit trigger word. The 100Mpt/S pattern generator has many features not found on other pattern generators. Since it has shared pins with the Logic Analyzer the pattern data can be tri-stated to create bidirectional bus signals. The PG also runs on an independent clock from the logic analyzer, hence you can create a slow signal and analyze the response at a much faster sampling rate. The pattern buffer length is adjustable and can be looped to create complex patterns. The PG can start manually or be synchronized with the MSO trigger inputs. High speed sampling is key to getting a good capture. The 200MSa single shot sample rate and 60MHz bandwidth will allow you see a great picture of a 60MHz signal in single shot mode and an even faster one if you use RIS mode sampling. The FFT Spectrum Analyzer has controls for FFT window, FFT type, FFT resolution. The software also supports averaging, memory and plot subtraction. This allows for a whole range of spectral analysis including: Frequency response analysis, Power supply noise analysis, etc...
MSO-19 USB 2GSa/s Oscilloscope, 200MSa/s Logic Analyzer, 100MSa/s Pattern Generator and TDR
Both the PCIe and USB based BERT devices are available on our site at FarSite FarSync Bit Error Rate Test (BERT) line quality tester devices, software and cables
Demonstration in the use, installation and features of the FarSync BERT Tester. It provides a comprehensive, simple to use, all in one, line testing utility for testing asynchronous and synchronous lines from your Laptop or PC. All the popular standard BERT test patterns can be selected; the test period can be controlled; real time error counters and full line test statistics are provided as well as support for user controlled error injection.
Lines with network interfaces RS232 (V.24), V.35, RS530 (EIA530), RS422, X.21 (V.11), and RS449 can be tested with line speeds ranging from 15 baud up to 2 Mbits/s or to over 10 Mbit/s for the PCIe dual port card version.
The FarSync Flex adapter is simply plugged into any of your Laptop's USB ports or a PCIe slot; select one of the cables provided to connect to the line to be tested; the BERT application can then be started and the line quality results are displayed in real time.
API access for LabVIEW or Windows applications enables the tests to be run, and the results obtained, programmatically.
FarSync BERT Tester-USB Flex with Bit Error Rate Test (BERT) line quality tester software + cables
FarSync BERT Tester-PCIe with Bit Error Rate Test (BERT) line quality tester software + cables
There's an updated version of this video here: Video: FarSync BERT Line Tester USB/PCIe operation, installation and features
Our USBscope50 is supported now in Win7 through the latest JAVA software.
Please instruct your customers who require this to download the NEW software from the link below:
http://www.elandigitalsystems.com/support/downloads.php
Also note that this facility is currently only available for the USBscope50, and as yet not all of the USB test and measurement range is supported.
Visual Basic will no longer be shipped with the USBscope50, all will have the JAVA software.
This can still be downloaded from the same link above, shown as 'original software' if required.
The FarSync BERT provides a comprehensive, simple to use, all in one, line testing utility for testing asynchronous and synchronous lines from your Laptop PC. There are no extra expensive modules to buy to test different line types. All the popular standard BERT test patterns can be selected; the test period can be controlled; real time error counters and user controlled error injection with full line test statistics are provided. Lines with network interfaces RS232C (V.24), V.35, RS530 (EIA530, RS422), X.21 (V.11) and RS449 can be tested with line speeds ranging from 15 baud up to 2 Mbits/s.New for the 1Gsps/75Mhz USB pen-style DSO (Digital Storage Oscilloscope)
We have issued a new version of the Java software for the USBscope50, which includes some minor bug fixes.
It also has a "check for updates" feature under "help" in the menu, allowing a user who is connected to the internet to check easily whether a later version of the software has been released. If a newer version is found, the software will offer to automatically download and install it.
We are now moving on to add the FFT function to the Java software, and expect this to be available around the end of June.
The new version is available from our website for download:
http://www.elandigitalsystems.com/support/usbtmfaq/software.php
